The Japanese heavy gauge stainless steel inner tank ensures an operation free of rust, corrosion, deformity and leakage.
The prime quality stainless steel heating element with built-in thermal cut-out ensures maximum thermal efficiency and safety.
The quality thermostat provides automatic temperature control to ensure constant water temperature and save energy. Temperature can be set to as high as 75 ℃.
The operation is not affected by water pressure. Hot water can be provided as long as there is a supply of cold water.
The two independent 3 kW heating elements quickly heat up running water through a dynamic thermal cycle for only 5 minutes.
The intelligent temperature control technology automatically detects the change in water temperature which enables a continuous hot water supply at 40°C for up to 40 minutes(2).
The smart-control heating system can achieve a higher water conservation rate and reduction in heat loss. Water and energy consumption is slashed with the water-saving showerhead by up to 70%(3).
Surpassing household electricity limitations, it only takes 3 kW of power to enjoy continuous bathing comfort. The patented alternate heating system enhances heating efficiency to render lasting supply of warm water.
Compared with traditional 4-gallon capacity electric water heaters, they offer a slimmer design (only 17.5 cm in thickness) that takes up much less bathroom space.
Tailor-made for Rapid Fast Flow Electric Water Heaters, the new water-saving aerator showerhead slashes up to 70% of the water consumed by a traditional 6-gallon water heater(4). The innovative Air Jet Compression Technology increases water discharge to a rate that is comparable to a massaging jet ( 9L / min ), resulting in a lasting showering experience without compromising comfort.
Air is drawn through the air hole to increase water pressure, bringing you the most comfortable showering experience with reduced water consumption.
The innovative Air Jet Compression Technology delivers showering comfort comparable to a massaging jet at 9L / min.
The flexible holder can be adjusted to different angles, allowing easy placement.
The water heater produces no gas pollutants during the water heating process. Its operation is absolutely free of toxic substances and colour.
To prevent accidental electric shock, the water heater comes with an earthing system and all electrical parts are insulated. The drip-proof and splash-proof design also ensure user safety.
Temperature can be adjusted(6) according to user preference. When the upper limit is reached, electricity will be cut off automatically; once the water temperature drops below the lower limit, power will be resumed.
If the water temperature reaches 90°C , power will cut off automatically to ensure safety.
When the water temperature reaches 90°C , the temperature relief valve will open automatically to prevent the buildup of steam pressure caused by continuous heating in the inner tank.
Under abnormal circumstances where the inner tank is subject to excessive pressure (more than 1,000 kPa (10 bar)), the pressure relief valve will open automatically to discharge water.
Hot water is prevented from being syphoned back into the supply pipe during water shortage. This effectively prevents inner tank damages and dry-heating.
Compared with traditional 6-gallon water heaters, the model is slimmer (only 17.5 cm in thickness) and takes up less space. The pioneering and distinctive black glass panel is modern, stylish and essential for a trendy bathroom.
The simple water inlet and outlet design allows for easy installation, avoiding installation errors.
(1) Patent# ZL 2016 2 1143463.4
(2) Ought to pair with the dedicated water-saving aerator showerhead. Inlet water at 20°C with a flow rate of 3.5L/min is heated for 30 minutes. Hot water at 40 ℃ can be continuously supplied for 40 minutes.
(3) Compared to a 6-gallon electric water heater under the condition of 20°C increase in water temperature with a flow rate of 3.5L/min.
(4) All Rapid Fast Flow Electric Water Heaters must be fitted and operated with the supplied showerhead.
(5) The inner tank warranty only applies to the replacement of inner tanks of heaters. Additional service charges on testing, transportation and labour may apply.
(6) In order to achieve the highest water temperature under normal circumstances, it is best to set the thermostat to the maximum level and then lower it by 0.5°C .
