The Japanese heavy gauge stainless steel inner tank ensures an operation free of rust, corrosion, deformity and leakage.
The prime quality stainless steel heating element with built-in thermal cut-out ensures maximum thermal efficiency and safety.
The quality thermostat provides automatic temperature control to ensure constant water temperature and save energy. Temperature can be set to as high as 85°C.
The operation is not affected by water pressure. Hot water can be provided as long as there is a supply of cold water.
Tailor-made for Rapid Fast Flow Electric Water Heaters, the new water-saving aerator showerhead slashes up to 70% of the water consumed by a traditional 6-gallon water heater. The innovative Air Jet Compression Technology increases water discharge to a rate that is comparable to a massaging jet (8L/min), resulting in a lasting showering experience without compromising showering comfort.
*Free only applicable to water heaters with capacity of 15 gal. or below
Air is drawn through the air hole to increase water pressure, bringing you the most comfortable showering experience with reduced water consumption.
The innovative Air Jet Compression Technology delivers showering comfort comparable to a massaging jet at 8L/min.
The flexible holder can be adjusted in different angles, allowing easy placement.
The GPU water heater produces no gas pollutants during the water heating process. Its operation is absolutely free of toxic substances and colour.
The injected polyurethane foam provides maximum insulation to the water tank. Also, GPU water heaters are compliant with the “Grade 1 Energy Efficient Label” (specified models only).
To prevent electricity leakage, the water heater comes with an earthing system and all electrical parts are insulated. The drip-proof and splash-proof design also ensure safety.
# Applicable to 6.5- or 10-gallon GPU models only
Temperature can be adjusted according to user’s preference. When the upper limit is reached, electricity would be cut off automatically; once the water temperature drops below the lower limit, power will be resumed.
If the water temperature reaches 82°C, power would be cut off automatically to ensure safety.
When the water temperature reaches 90°C, the temperature relief valve will open automatically to prevent the buildup of steam pressure caused by continuous heating in the inner tank.
Under abnormal circumstances where the inner tank is subject to excessive pressure (more than 1,000kPa (10 bar)), the pressure relief valve will open automatically to discharge water.
Hot water is prevented from being syphoned back to the supply pipe during water shortage. This effectively prevents inner tank damages and dry-heating.