What is spawning on your bed?

Convinced that your bed is clean? Think again. There are in fact over 20,000 dust mites dwelling on your bed. Exfoliated skin cells, fine dust, dust mites and their excretion can cause skin irritation and trigger allergic rhinitis and short of breathe upon ingestion.

PM 2.5

Bacteria

Dust Mites

Dead Skin Cells

Other Allergens

4 Steps to Effectively Eliminate Mites & Germs

The highly effective germicide system cleans your bed thoroughly through 4 steps. By making your bed extra-clean, having a good night’s sleep is no longer a dream!
Step 1

Cyclone Suction Technology

Adopting the powerful G12 motor, the generated 12kPa cyclone suction force can effectively eradicate dust mites and allergens. Cleaning is easier than ever!

Step 2

Dual Vibration Pads

Vibrating up to 8000 pats/minute, the pads can effortlessly detach tough dust mites from bed sheets. Meanwhile, the cyclone suction force will simultaneously eliminate allergens, exfoliated skin, hair dust and etc.

Step 3

Powerful UV Sterilization Tube

Turning on the UV Sterilisation Tube means performing dust removal and disinfection at the same time. This can guarantee clean bedding and protect your family against secondary contamination.

Step 4

PTC Anti-Mite Thermal System

Without killing the dust mites, ordinary mite cleaner is prone to facilitating their secondary transmission. German Pool’s 3-in-1 Anti-Mite UV Sterilising Cleaner is equipped with PTC thermal system, which can rapidly generate high heat to exterminate dust mites concealed in your bedding.

3-in-1 Multi-functional Capabilities

Not only can the German Pool 3-in-1 Anti-Mite UV Sterilizing Cleaner effectively remove dust mites, it can also perform floor and gap cleaning simply by attaching different accessories.

3-Tier Air Purification System

German Pool’s Anti-Mite UV Sterilising Cleaner is endowed with a 3-tier air purification system to effectively prevent the venting of dust and allergens, which can cause secondary contamination. Now every breathe that you inhale is purer and fresher!
1
The Valve
Sift hair, debris and large dust particles
2
The Screening Filter
Screen small granules and particles
3
HEPA H13 Filter
The HEPA H13 filter removes up to 99.99%* dust, mites, germs, PM2.5 and pollens...
*US ICS Laboratories,Inc. T8028-00-1 Issue1 Testing result

Want to replace your old filter cartridge?

The optional HEPA filter package includes 2 filter cartridges that will purify air and clear dust in seconds. Buy Online
The optional HEPA filter package includes 2 filter nets that will help you purify air and clear dust in seconds. Buy Online

Micro-Movement Detection Technology

Equipped with a pair of photo sensors and a micro-movement switch. When it leaves the target surface, the UV sterilisation tube and the PTC thermal system will be automatically switched off to guarantee safety.

Cleaning in 3 Simple Steps

1Push the button
2Take out the dust container
3Remove the dust

User-Friendly Features

Portable & Ergonomic Design

The ergonomically slanting handle makes it easier to carry and reduces strain on wrists and joints during operation.

Silent Operation

The G12 motor can generate powerful suction force with low operating noise. Indoor noise pollution will not be a problem.

Easily Detachable Components

Parts are detachable to serve various cleaning needs. You can easily remove dust mites from your bed and vacuum-clean your house with just one versatile device.

2 Cleaning Modes

The “Patting” and “UV Thermal Sterilization” buttons can be selected either one at a time or both at the same time.

Accessories

Dust Mite Exterminator

Small Nozzle

Extendable Tube

Flat Nozzle

HEPA Filter (Replaceable)

Specifications
  • Information
  • Functions & Features
  • Others
  • Specifications are subject to change without prior notice. Please refer to the Instruction Manual for Warranty Information.

More Details

FAQ

Hot air is being released from the air vent. Is that normal?
Yes, it is normal. By releasing hot air, heat is drawn away from the motor.
Why does my new 3-in-1 Anti-Mite UV Sterilising Cleaner smell?
In the first 3 months of use, it is normal for the brand new rubber components of the 3-in-1 Anti-Mite UV Sterilising Cleaner to carry an odor. However, if the smell originates from the accumulated dust and allergens inside the filter, please replace the filter immediately.
The glass cover of the UV sterilisation tube discolours. Does it need to be replaced?
It is normal for the glass cover to discolour over time due to its exposure to UV light. It does not need to be replaced.
Why are the UV tube and vibration pads not activated when the product is in use?
Please pay attention to the two independent buttons at the back of the product that allow you to select either or both "Patting" and "UV Thermal Sterilization" modes. Also, equipped with a pair of photo sensors and a micro-movement switch, when the 3-in-1 Anti-Mite UV Sterilising Cleaner leaves the target surface, the UV sterilisation tube and the PTC thermal system will be automatically switched off to guarantee safety.
The 3-in-1 Anti-Mite UV Sterilizing Cleaner suddenly shuts down while operating. Why?
It is because the filter is blocked, causing the motor to overheat. The overheat protection device is activated, resulting in the sudden shut down. Let the appliance cool down and clean the HEPA filter with a small brush. Then, restart the appliance.