Movable Design & Easy Installation

Perfect for All Seasons

The Movable Bathroom Heater comes with 3 modes including “High Heat”, “Low Heat” and “Fan”. Perfect for all seasons.

IP23 Dust & Water Resistant Rating

The Movable Bathroom Heater effectively resists direct splashing and is also dust-resistant, making the heater extra-safe to use in every corner of your home, especially the bathroom.

Remarkable Features

User-Friendly Features

Dustproof Filter

Effectively filters harmful substances such as dust, bringing about fresh indoor air.

Movable Design

The movable design makes the bathroom heater suitable to be used anywhere in your home.

Multifunctional Remote Control

Comes with a convenient smart-control timer with 4 clock settings.

Built-In Cooling Fan

The cooling fan will operate as long as the PTC heating element is activated, ensuring the heater’s durability.

Safety Protection

Specifications
  • Information
  • Functions & Features
  • Others
  • Specifications are subject to change without prior notice. Please refer to the Instruction Manual for Warranty Information.

More Details

FAQ

What is the best way to install the Detachable Metal Rail of the Portable Bothroom Heater?
Insert the ends of the metal rail into the slots located on the two sides of the air vent, then pull gently while wriggling until it is securely fixed. Gently push while wriggling the metal rail to detach it.
Is there anything I have to pay attention to when installing the Portable Bathroom Heater on the wal
Drill two 6 mm-holes (29 mm in depth) on the wall. The distance between them should be 74 mm. Insert the screw plugs into the holes. Then, insert the screws through the wall hook and then the screw plugs. Tighten the screws. Finally, attach the appliance onto the hook. If you would like to have your bathroom heater be installed by a technician, please contact our customer service team. Attention: The power cord of the Portable Bathroom Heater cannot be extended.
What is the best way to clean and maintain the Portable Bathroom Heater?
Wipe the surface with a soft cloth. If the surface is too dirty, wipe with a mixture of water below 50°C and neutral detergent. Let it air-dry. Attention: Do not clean the appliance with chemicals such as petrol, thinner and diluents or the surface can be blemished.
How long is the cord of the Portable Bathroom Heater?
The cord is 160cm long. The Heater also comes with a IR remote control, so it's easy to place and operate in most locations.
Is there anything I have to pay attention to when storing the Portable Bathroom Heater?
Make sure the appliance has cooled down and dried properly before packing it for storage. Activate the cooling fan for 1-3 minutes to cool down the heater before powering off. Store it in a dry and ventilated place.
Why does the heater go on and off?
The appliance is designed with an anti-tipover switch. When the appliance is tilted, the base deviates from ground or is placed on an uneven surface, the switch will pop out and cut off electricity connection for safety. To bring it back to operation, place the appliance on a flat surface and push the switch back to its original position