Category: Fan
General
Importance: star_ratestar_ratestar_ratestar_rate
Difficulty: star_ratestar_ratestar_ratestar_rate
Answer:
It is rather simple. You only need a Philips head screwdriver. Follow the 3 steps below:
(Table-top => Floor-standing)
- 1. Carefully turn the unit upside down. Loosen the L shaped locking screw. Insert the pedestal tube into the base plate.
- 2. Tighten the L-screw manually to secure the tube with the base plate.
- 3. Attach switchbox body to pedestal tube. Connect them with locking screw.
(Floor-standing => Table-top)
- 1. Unscrew the locking screw to detach switchbox with pedestal tube.
- 2. Carefully turn the base plate upside down. Loosen the L-screw to remove the pedestal tube.
- 3. Insert the switchbox body directly to the hole of base plate. Secure them with L-screw finally.
Remark: The elderly, children and persons who are lack of physical strength are not suggested to transform the fan themselves.