Water Heater (1-Phase Power Supply) - GPI-M6

  • Made in Germany
  • IES® bare wire heating system
  • Power: 6.0 kW (220 V)
  • Instant supply of hot water at 30-45 °C without preheating or heat loss
  • Ultra compact design
  • 1-phase electric power supply
  • New flow technology for optimal water consumption
  • Saves up to 60 % of energy
  • Single-Point Application
  • Designed & Assembled in Germany
  • Mini-sized, hydraulically controlled instantaneous water heater
  • IES® bare wire technology is efficient and easy maintenance, with a replaceable heating cartridge
  • The heating element is activated automatically as soon as water begins to flow through the unit
  • Saves up to 60 % energy in comparison with a small storage water heater
  • Ø 1/2” Inlet/outlet water pipes; supplied with suitable power cable
  • Perfect for use in kitchen sink, domestic and commercial hand wash basin
  • Awarded CE and CCC
1 of 2
www.germanpool.com/eng/products/wh_instant.php?mdl=gpi-m6

Specifications

  • Information
  • Model / Sub-Model
    GPI-M6
  • Power Setting
    6 kW
  • Voltage
    220 V
  • Electric Power
    28 A
  • Power (Max)
    6 kW
  • Power Supply
    1 Phase
  • Hot Water Flow Rate Per Minute*
    3.3 L
  • Min-Max Flow Rate
    2.2-3.3 L/min
  • Required Cable Size
    4 mm²
  • Colour
    White
  • Dimensions
    (H) 135 (W) 186 (D) 87 mm
  • Packing Dimensions
    (H) 230 (W) 185 (D) 130 mm
  • Net Weight
    0.9 kg
  • Net Weight: Filled with Water
    1.5 kg
  • Functions
  • Temperature Adjustment
    N/A
  • Testing Pressure
    10 Bar
  • VDE Approval / Class
    IP24 (IP25 oversink installation) / Class 1
  • Country of Origin
    German
  • Others
  • Warranty Term
    3 Years
  • Warranty Term(Parts)
    3 Years **
  • Upon purchases made after 1 November 2015, customers will enjoy a 3-year warranty on all parts plus free on-site and parts replacement services in the first year.
  • * Temperature increase @ Δt=25K e.g. from 15 to 40°C.
  • Under normal working conditions, incoming pressure should not exceed 0.6 MPa. Otherwise, a separate pressure control device is necessary. When incoming water pressure exceeds 0.6 MPa, German Pool will not provide any repair service until a pressure control device is installed.
  • Specifications are subject to change without prior notice. Please refer to the Instruction Manual for Warranty Information.