Water Heater (3-Phase Power Supply) - CEX21

  • Made in Germany
  • Full electronic instantaneous water heater
  • Suitable for under ceiling operation
  • Single or multipoint application
  • 3-phase electric power only
  • Multiple Power System MPS®
  • Provides a constant supply of hot water at exactly the temperature selected (up to the full rated power output) due to TWIN TEMPERATURE Control TTC®
  • Heating power electronically adjusted to compensate variable inlet pressures and temperatures
  • Bare wire technology IES® achieves the most energy-efficient way of producing hot water electrically plus the fastest possible heat up time
  • Max. approved inlet temperature (< 70 °C) is suitable for use with pre-heated water e.g. from solar heating systems
  • Multiple Power System MPS®: The power rating can be selected between 16.2 – 19.4 kW (380 – 415 V) and 19.0 – 22.6 kW (380 – 415 V) at the time of installation.
1 of 2
www.germanpool.com/eng/products/wh_instant.php?mdl=cex21

Specifications

  • Information
  • Model / Sub-Model
    CEX21
  • Power Setting
    18 kW | 21 kW
  • Voltage
    380 - 415 V
  • Electric Power
    23.4-28.8 A | 28.8-31.4 A
  • Power (Max)
    16.2-19.4 kW | 19-22.6 kW
  • Power Supply
    3 Phase
  • Hot Water Flow Rate Per Minute*
    10.7L at 21kW (flow limiter 8L/min)
  • Min-Max Flow Rate
    2-8 L/min
  • Required Cable Size
    4 mm²
  • Colour
    White
  • Dimensions
    (H) 294 (W) 177 (D) 108 mm
  • Packing Dimensions
    (H) 390 (W) 235 (D) 145 mm
  • Net Weight
    2.8 kg
  • Net Weight: Filled with Water
    3.1 kg
  • Functions
  • Temperature Adjustment
    20-60 °C
  • Testing Pressure
    10 Bar
  • VDE Approval / Class
    IP 25
  • Country of Origin
    Germany
  • Others
  • Certification / Standard
    VDE/EMC, VDE/GS
  • Other Certification
    CB/ISO
  • Warranty Term
    3 Years **
  • * Temperature increase @ Δt=28K e.g. from 12 to 40°C.
  • Under normal working conditions, incoming pressure should not exceed 0.6 MPa. Otherwise, a separate pressure control device is necessary. When incoming water pressure exceeds 0.6 MPa, German Pool will not provide any repair service until a pressure control device is installed.
  • Specifications are subject to change without prior notice. Please refer to the Instruction Manual for Warranty Information.